Re: Lamination Demo - Additional Information

Posted by MarkR on
URL: http://riverswest-forums.266.s1.nabble.com/Lamination-Demo-Additional-Information-tp124p145.html

Randy Torgerson suggested belt sanding the raw laminations to remove the excess epoxy from the edges of the laminations.  I tried it this afternoon and it is a great technique!  A few swipes with the belt sander removes most of the excess epoxy.  Then a few passes with my trusty #4 and it was absolutely clean and flat.  Flipped it over and did the other side, now it's all ready for the thickness planer.  This took very little time and it didn't dull the blade of my plane.

This is a great tip, Randy!  Thank you.

Mark