We have several sets of canoe molds available for members
at RiversWest.
Canoe molds available for:
John Winters "Mattawa" 15'8" x 36",
for this one you need to buy plans from Green Valley, see
http://www.greenval.com/mattawa.html
16' "Prospector" from Ted Moores' book Canoecraft.
Plans are free from lofting in book or can be bought at
http://bearmountainboats.com/plans/canoe-plans/#!/~/product/category=2192040&id=8201318
13' version of the "Laker" by Gil Gilpatrick,
can also be built as a 16' canoe by adding two more forms.
Plans are free in his book Building a Strip Canoe.
14' solo canoe "Puddle Duck" by Gil Gilpatrick,
Plans are free in his book Building a Strip Canoe.
(Note: this photo used from the Wooden Boat site)
We have two sets of these molds, one from R. Torgerson
complete with clamping braces, and another older set.
Free plywood to be cut down for boat or canoe molds
1/2" and 3/4" Please take it all!
Two transoms for a 15' Skiff
1-7/8" thick, 57-1/2" wide, one is 15" one is 20" high in center.
Locked
